|
Motorcycle > 4-Stroke |
|
 |
FFO FOAM FILTER OIL SPRAY
|
|
|
 |
|
Product Description |
|
|
Torco FFO Foam Filter Oil Spray is formulated with special base oils and tackifier additives to prevent moisture and abrasive elements from passing through foam filter elements and entering the engine. FFO is easy to apply and will not dry out, drip or run. FFO will not gum up or clog foam passages. |
|
|
|
Features & Benefits |
|
|
>Synthetic blend formula
>Prevents moisture and harmful elements from passing through filter
>Maximizes airflow for consist jetting and performance
>Easy to apply and easy to clean up |
|
|
|
Typical Uses |
|
|
Application: Shake well before use. Hold FFO 6-8 inches away from filter surface and spray an even coat to the outside and inside of the filter. Massage the filter to work in product thoroughly. Do not ring out the filter, as damage may occur to the foam. To provide a good seal, apply a thin layer of Torco Multi-Purpose Waterproof Grease to the sealing surface of the filter. Use latex or rubber gloves when applying filter oil.
Cleaning: Thoroughly wash used filter with light cleaning solvent or a combination of detergent and warm water until all dirt particles are removed from the foam. Rinse with clean water and squeeze out excess. Do not ring out the filter, as damage may occur to the foam. Once filter is completely dry, apply FFO as directed above. |
|
|
|
Meets or Exceeds |
|
|
Formulated to exceed manufacutrers' specifications. |
|
|
|
Available Sizes |
|
|
13.0 Oz. Can |
|
|
|
|