Home   Products   Consumers   Dealers   Innovation   About Us   Gallery   Team Torco   News   Contact Us Torco Logo
magnetic friction reducer
 

MPZ MAGNETIC FRICTION REDUCER


Product Description

MPZ Magnetic Friction Reducer is the same race proven, friction reducing technology in every Torco "Professional Series" motor oil. MPZ MFR is a key component to reducing frictional losses and when added to other brands of motor oil can increase horsepower and torque by as much as 1%-3%. This directly translates to improved fuel efficiency (as much as 6.3% during city driving and 8.5% during highway driving conditions), improved component durability, reduced operating temperatures, reduce oil degradation and peace of mind. Compatible with all synthetics, synthetic blends and petroleum based motor oils.

   

MPZ Oil Additive
Magnetic Friction Reducer
$17.75
12 oz. bottle

   


Features & Benefits
MPZ MAGNETIC FRICTION REDUCER

- Improves fuel efficiency
- Increases horsepower & torque
- Increases wear protection for longer engine life
- Reduces operating temperatures


More Info

MPZ "MFR" was originated in 1994, a time when very little concerns were exposed as to engine lubrication chemistry. Without any thought people were putting into there engines all kinds of concoctions just totally inspired by advertizing hype. Because of this, lots of testing was conducted on "MFR". Even as recently as a year ago I dynode "MFR" in a typical diesel formula and it picked up a traditional 1.5%. All through the years we have seen between 1 to 3% increases depending on the many variables at hand. "MFR" is based on a large Dose of phosphorous to set up chemical absorption and polar bonding of the moly to all surfaces in contact with each other. It really doesn't do much until the trigger of metal contact occurs from the full fluid film going away from, "Heat", "Speed", and "Load".

As Heat, speed and load come together, and squeeze, shear, and, vaporize the fluid film; the only saving grace to the engine part in question is the chemical reaction film being deposited in place of the liquid oil. All down through the years Zinc-dialkyldithiophosphate has been the savior. In 1973 we found that Zinc could be modified with liquid "Moly" to change the friction that occurred with Zinc alone.

Today we are aware that Torco oil formulas will find there way into street applications so that the "MPZ" composition is adjusted to be friendlier toward emission requirements. For all out racing engine applications it's hard to beat the reaction films created when using "MFR". These chemistries are very tolerant of each other and we have not seen evidence of negative impact using the MFR in other Torco formulas where New Generation MPZ exists. The concentration of ingredients is extremely high in a bottle of MFR and because it always needs to be present in the oil to rebond after asperity collision of surface contacts, it can leave a visible deposit. The ratio of a 12oz bottle to 4 to 6quarts (or liters) equates to a treat of between aprox. 6 to 9%, that's very high. We know that some additional increase in concentration has been identified as some more power up to 12% but the engine has some visually more deposit identity to it. We have never seen or been told that evidence exists that these deposits effected filters, pumps or related flow requirements. We have customers using "MFR" in diesel applications and have not heard of any negative feed back that a problem occurred by its use. Over the many years of testing and customer feed back there is a known fact that even when the oil containing "MFR" is flushed out and replaced with non treated oil the horsepower increase that occurred will remain for some time until the zinc that is contained in the fresh oil has time to deposit its own High coefficient of friction layer increasing friction back to the original established friction.

The friction modifiers used for energy conserving requirements in modern engine oils work and behave differently than "MFR". They work by polar bonding fairly fragile polar films that under light load maintained speeds conducted under economy test conditions provide additional fluid film friction reduction in comparison to fluids not containing friction modifiers. These friction modifiers are not based on Phosphorus chemistry thereby complying with the needs of catalytic converter requirements. "MFR" doesn't seem to be effected by these types mainly I think, because it so drastically overwhelms them by the fact of so much concentration comparison. They virtually are greatly outnumbered.


Available Sizes

12 Oz., 55 Gallon Drums


© Copyright 2008 - Torco International Corp. ALL RIGHTS RESERVED | Blending Horsepower since 1950
Site Design: www.VaporTrailProduction.com
Feedback

Twitt it
Share it

Twitt it
Pin it

Twitt it
Tweet it


Plus it